2021+ Instinct Technical Info

2021+ Instinct Bottom Bracket Size
Both the Alloy and Carbon version of the Instinct use a Press Fit BB92 bottom bracket. This means that the bottom bracket shell is 92mm wide with a...
Mon, 16 Aug, 2021 at 10:53 AM
2021+ Instinct Fork Offset
The fork offset on the 2021 Instinct is as follows: Instinct 27.5" wheels: 37mm offset Instinct 29" wheels: 44mm offset
Mon, 16 Aug, 2021 at 10:53 AM
2021+ Instinct Frame Protection, Canadian Shield, Cable Covers and Chain Guide Installation How-to
A how-to guide on how to install the frame protection, Canadian Shield, cable covers, and the chain guide can be found here. 
Mon, 16 Aug, 2021 at 10:53 AM
2021+ Instinct Headset Size
Both the Alloy and Carbon versions of the Instinct use a ZS44|ZS56* headset, with a standard lower cup. *ZS = Zero-Stack, also know as semi-int...
Mon, 16 Aug, 2021 at 10:53 AM
2021+ Instinct Maximum Chainring Size
The maximum chainring sizes that are compatible with the 2021 Instinct are:  Instinct 27.5" wheels: All sizes (XS & S) = 36t Instinc...
Mon, 16 Aug, 2021 at 10:53 AM
2021+ Instinct Maximum Recommended Fork Length
The maximum fork axle-to-crown that we recommend on the 2021 Instinct are: Instinct Alloy & Carbon with 27.5" wheels: 566mm Instinct ...
Mon, 16 Aug, 2021 at 10:55 AM
2021+ Instinct Maximum Seatpost Insertion
Dropper post length is dependent on a couple of factors; the first being your saddle height and the second being the maximum seatpost insertion depth which ...
Mon, 16 Aug, 2021 at 10:54 AM
2021+ Instinct Rear Axle Size
The Instinct uses a 12mm x 148mm rear hub. The total axle length is 173mm, with a 1.5 thread pitch.  Replacement rear axles can be purchased from our on...
Thu, 30 Sep, 2021 at 4:26 PM
2021+ Instinct Seatpost Diameter
Both the Alloy and Carbon versions of the Instinct require a 30.9mm diameter seat post. For the maximum seatpost insertion, please visit the following p...
Mon, 16 Aug, 2021 at 10:54 AM
2021+ Instinct Shock Sizing and Shock Hardware
On all 2021 Instinct models, the forward shock hardware is a 25mm x 8mm ID pin and reducers. The rear shock mount uses our bearing eyelet hardware.&nbsp...
Mon, 16 Aug, 2021 at 10:55 AM